Showing 1–12 of 57 results
DROP Fiber GJYXFH-1B6 DialectricThe optical fiber drop cable shall have sequentially numbered length marking at intervals of approximately 1 meter. The starting number of ordering length for any coil shall begin whit zero meter. The accuracy of the measurement of lenth marking shall be held within the limits of ±1%.
AIR BLOWING DUCT FIBEROptical Fibers are housed in loose tubes that are made of high-modulus plastic and filled with tube filling compound. The tubes (and fillers) are stranded around a non-metallic central strength member andsurrounded with dry water-blocking material to form a cable core. An extremely thin outer PE sheath is extruded outside the core.
OPTICAL FIBER ASUG.652D Aerial Self-Supported ASU Fiber Optic Cable has a loose tube structure and water-resistant gel compound to provide crucial protection for the fiber. Over the tube, water-blocking material is applied to keep the cable watertight. Two parallel fiber reinforced plastic (FRP) elements are placed on the two sides. The cable is covered with a single PE outer sheath. It is especially suitable for installation in aerial for long-distance communication
RG6 Bishield 90%
RG6 Bishield 90% with Messenge
|I||Center Conductor||opper Clad Steel (25% IAC||(DI mm|
|2||Dielectric||Gas Injected Foam PE||04.57mm Nominal|
|3||Foil Shield||Al/Polyester/Al Laminated Tape Bonded to Dielectric||04.78mm Nominal Overlap 18% Minimum|
|4||Braid Shield||Al Braid Wire||144/0.12mm,|
|6||Messenger||Zinc Coated Carbon Steel||01.30±0.05mm|