Product Description
OPN-Micro55M Micronodo
Amplifier line extender
Amplifier Bi-directional AMP 8602
Amplifier Bi-directional 35-90V
Outdoor trunk bidirectional amplifier is mainly used for bidirectional trunk transmission of CATV television image signal, digital TV signa, and telephone voice signals and data (or compressed data) signal. Advanced and mature circuits, scientific and reasonable process structures and high quality materials, ensure the excellent performance. It is the first choice equipment to build large or middle- sized CATV bidirectional transmission network.
+
Producto añadido!
Navegar por Lista de Deseos
El producto ya está en la lista de deseos!
Navegar por Lista de Deseos
Related Products
ADSS Doube PBT
Loose tube construction, tubes jelly filled, elements (tubes and filler rods) laid up around non-metallic central strength member, polyester yarns used to bind the cable core, water blocking tape wrapped around the cable core, PE inner sheath, then aramid yarns and PE outer sheath.GYXTW
• Outer Jacket MDPE • Corrugated steel tape covered of Phospated Steel • Loose tube steel ribbon attached with color melt glue • Range of application: for long distance and loca communication • Installation method: in pipeline or underground duct or aerial assembly • Application temperature: -40 ~ +70EDFA 19dB x 8 Outs
- Output ports: 8, 16 32 (optional)
- Optical output power: total output up to 10W
- Low noise figure: <5dB when input is 0dBm
- Perfect network management interface, in line with standard SNMP network management
- Intelligent temperature control system make the power consumption lower
OPN8601G Optical Workstation
Four (4) independent RF output with optical Automatic Gain Control (AGC), any optical node in one optical network, if only the optical power range is within -7dBm~+2dBm,we don’t need adjust the attenuating value of the attenuator of this machine, we can ensure the output level of the whole machine remain the same, and CTB & CSO are remained unchanged, it is easy for debugging the project.Optical Node OPN8604
New high-end four-output Optical Receiver CATV network, in front of the class-wide GaAsMMIC amplification, after the class for the GaAs amplifier module, optimizing the circuit design, couple with the company for more than a decade of professional design experience, make the machine achieve a high performance, RF attenuation and balanced regulation of the use of fixed insertion attenuation, especially to facilitate debugging the project is to build models the mainstream of CATV networks.
1. Designed for triple play FTTH
2. Build-in WDM Technology applied to GEPON/GPON System
3. AGC Function Optional
4. Frequency range 40-860MHz For CATV Network
5. Voltage supply: DC Adaptor & RF Port
6. RF Interface for CATV
7. Optical Output Interface for data SC/APC or SC/PC option
8. Smaller size and easier install
9. Red-LED Power Indication
10. Green-LED Optical Power Indication
Read more
1.Model Number: OPN-Micro55WDM; Brand: COMCAST
2. Designed for triple play FTTH
3. Built-in WDM, suitable for single-fiber triple wavelength system,
RFTV operating wavelength 1550nm, pass wavelength
1310/1490nm,
can conveniently connect the ONU of GEPON, GPON.
4. No Power Required
5. Frequency range 40-1000MHz For CATV Network
6. RF Interface for CATV End-Users (F-Female)
7. Optical Interface for data SC/PC
9. Aluminum Profiles housing, excellent heat dissipation
performance
10. Much smaller size and very easy install
Read more OTDR AE1001
The last thing a fiber maintenance technician needs is a double armful of bulky, feature-bloated equipment to bog down the job. The new AE1001 from Deviser Instruments is a sleek, zerofuss OTDR weighing less than 1 kg that tests the common 1310 & 1550nm wavelengths in 5s flat. Low power consumption and a solid 2500mAH battery allow the AE1001 to run automated, manual, or real-time tests continuously for over 4 hours, and are supplemented with the always-handy OPM and VFLOPTICAL FIBER OPGW
This specification covers COMCAST® OPGW for the installation on high voltage overhead power lines. The cable contains optical fibers for data transmission and telecom purposes and is installed instead of a ground wire. The specification describes the basic design of COMCAST® OPGW with its main components: the fibers, the optical fiber unit and the cable armoring. Furthermore this specification contains information concerning the quality assurance during manufacturing, the final acceptance tests, the type tests and the packaging.Micronodo Passive 55MF
➢ Model Number: XFO HN001F ➢ Designed For FTTH (Fiber To The Home Network) ➢ No Power Required ➢ Exelent Linearity and Flatness ➢ Frequency range 40-1000MHz For CATV End-users ➢ Optical Connector: SC/APC ➢ PVC Casing(Actractive customized case colours) ➢ With RF Shielding ProtectionFTTH- Fast Connecor SC/UPC
Optical fast connector takes use of the latest generation of Rapid Ready-Terminal technology. After terminating, both the optical and mechanical performances reach the standard for patchcord and meet the demand for making patchcord on site by mechanical splicing.OPN-Micro55MT
2. Designed for FTTH (Fiber to The Home Network) 3. No Power Required 4.Lensed protection and high responsivity PD for more performance 5. Excellent Linearity and Flatness 6. Frequency range 40-1000MHz For CATV End-users 7. Optical Connector: SC/APC 8. Aluminum Profiles casing, excellent heat dissipation performance 9. Small and Cute Design for Easy Handling 10. Good RF Shielding Protection 11.Built-in 1310/1490nm filter, suitable for single-fiber triple wavelength system, RFTV operating Wave length 1550nm.GQ-3650DR
High density and all-in-one multi functional QAM modulator devolped by GOSPELL. It combines RF receiving & demodulation, TS re-multiplexing, scrambling and QAM modulation into 1RU, and provides two kinds of RF demodulation options; either QPSK/8PSK or QAM demodulation can be selected according to operators’ needs. Moreover, the GQ-3650DR supports up to eight channels of input transport streams from ASI interfaces. Therefore, with this product, operators obtain lower cost expenditure, lower energy consumption and minimized space of racks occupied. This all comes from the benefits of GQ-3650DR’s high density and all-in-one design.ZTE ONT F660
GPON Optical Network Terminal designed fot FTTH scenario. It support L3 function to help suscribers construct intelligent home network. It provides subscriber ricj, color full,individualized, convenient and confortable service including voice, video ( IPTV) and high speed intenet accessADSS Span 250
Loose tube construction, tubes jelly filled, elements (tubes and filler rods) laid up around non-metallic central strength member, polyester yarns used to bind the cable core, compound filled in the apertures of the cable core, then PE inner sheath, aramid yarn reinforced and PE outer sheath.FTTH- Fast Connector Type Y SC/UPC
Fiber optic fast connector designed for FTTH. It is a new generation of fiber connector used in assembly. It can provide open flow and precast type, which optical and mechanical specification meets the standard optical fiber connector. It is designed for high quality and high eddiciency for installation, the structure of crimping position is a unique design.EDFA 19dB x 16 Outs
- Output ports: 16 or 32 (optional)
- Optical output power: total output up to 10W
- Low noise figure: <5dB when input is 0dBm
- Perfect network management interface, in line with standard SNMP network management
- Intelligent temperature control system make the power consumption lower
ADSS ANTI-RODENT SPAN 200
The ADSS (All Dielectric Self Supported totally dielectric and selfsupporting) fiber optic cable is designed for aerial installations between poles. It also has an Anti-rodent to protect it from rodents, which makes it the perfect cable for installations on towers.
VISUAL FAULT LOCATOR
Pen design, easy to carry and use, easy to check fiber faults with visual light, Portable and rugged, has always, flash, slow flash 3 modes of operation, Master switch in the pen tail pipe
• Easy and Accurate Identification - It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area.
Read more CS-6 Cleaver
Bare fiber diameter: 0.25mm~ 0.9mm Outercoat diameter: 125 (micro)m Fiber type: Single tube fiber and ribbon fiber (Exchangeable) Cleaved Length: 9~16mm (Φ0.25) 10~16(Φ0.9) Cleaved Angle: 0.5 °C Blade life: 36000 cleaves Mode: Semiautomatic Dimension: 59mm (W)* 55mm(D)* 49mm(H) Weight: 255g ]OPN-MicroF860AC
• Designed For FTTH(Fiber To The Home Network) • Excellent Linearity and flatness • Frequency range 40-1000MHz For CATV End-users • Voltage supply: +6V~18V(DC) • Optical Connector: SC/APC 6. Aluminum Profiles housing,excellent heat dissipation performance • Smaller size and easier install • Red-LED Power Indication • Green-LED Optical Power Indication(Optical power >- 10dBm)FTTH- Fast Connector Type Y SC/APC
Fiber optic fast connector designed for FTTH. It is a new generation of fiber connector used in assembly. It can provide open flow and precast type, which optical and mechanical specification meets the standard optical fiber connector. It is designed for high quality and high eddiciency for installation, the structure of crimping position is a unique design.Fiber ADSS Span 100
Loose tube construction, tubes jelly filled, elements (tubes and filler rods) laid up around non-metallic central strength member, polyester yarns used to bind the cable core, water blocking tape wrapped of the cable core, aramid yarn reinforced and PE outer sheath. the prices is for 1 KM, and the purchase is for 5 KM reelOPN8624D Nodo Óptico
OPN8624D receptor óptico de uso externo es uno de nuestros modelos diseñados para una RED con CATV, que cuenta con la función NEC GaAs en su módulo de amplificación. Utilice la tecla para seleccionar la función AGC / MGC. Cuando la energía óptica de entrada es -6 ~ + 2dBm, el nivel de salida es estable, lo que hace que el dispositivo con tenga un mayor índice de rendimiento. SCM controla la pantalla digital LED para mostrar todos los parámetros de trabajo del dispositivo, lo que hace que la depuración del proyecto de la red CATV sea muy conveniente. Las señales digitales y analógicas se pueden transmitir al mismo tiempo. Actualmente el dispositivo es el modelo preferido en la construcción de sistemas de red HFC.FTTH- Fast Connector Type B SC/APC
1.SC APC UPC single mode fast connector terminates the end of an optical fiber and enables quicker connection and disconnection than splicing. 2.The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers.FUSION SPLICE XFO600
The machine employs high-speed image processing technology and special positioning technology, allowing the total process of fusion splicing to be finished within 10 seconds. Large-screen LCD clearly demonstrates every stage of optical-fiber fusion splicing. As the machine is compact in size, light in weight, it is ideal to work in outdoor environment. In addition, it is easy to operate, fuses fast, with low fusion loss, especially suitable for the construction and maintenance of the optical-fiber works built in a wide range of sectors including telecommunications, broadcast & TV, railway, petrochem, electricity, army, police, as well as teaching and research of scientific institutes. In order to finish the fusion operations more accurately, please thoroughly read this Manual. All our prices is in USDEDFA 23dB x 32 Outs
- Output ports: 16 or 32 (optional) Optical output power: total output up to 23W
- Low noise figure: <5dB when input is 0dBm
- Perfect network management interface, in line with standard SNMP network management
- Intelligent temperature control system make the power consumption lower
OPN8602S series are our universal CATV network optical receiver with network management transponder. The pre-amp adopts all-GaAs MMIC amplify and the post-amp adopts GaAs power double amplify module (This series has two models, M model RF attenuation and equilibrium adopt the continuously adjustable design, MF model with different fixed attenuation and equilibrium inserters for user option. Users can also choose more targeted high quality modules according to actual requirements). Optimized circuit design, coupled with our years professional RF design experience, the equipment achieve high performance index. It is an ideal model for CATV network.
(all price in USD)
Read more