Product Description
OPN-Micro55M Micronodo
Amplifier line extender
Amplifier Bi-directional AMP 8602
Amplifier Bi-directional 35-90V
Outdoor trunk bidirectional amplifier is mainly used for bidirectional trunk transmission of CATV television image signal, digital TV signa, and telephone voice signals and data (or compressed data) signal. Advanced and mature circuits, scientific and reasonable process structures and high quality materials, ensure the excellent performance. It is the first choice equipment to build large or middle- sized CATV bidirectional transmission network.
+
Producto añadido!
Navegar por Lista de Deseos
El producto ya está en la lista de deseos!
Navegar por Lista de Deseos
Related Products
1.Model Number: OPN-Micro55WDM; Brand: COMCAST
2. Designed for triple play FTTH
3. Built-in WDM, suitable for single-fiber triple wavelength system,
RFTV operating wavelength 1550nm, pass wavelength
1310/1490nm,
can conveniently connect the ONU of GEPON, GPON.
4. No Power Required
5. Frequency range 40-1000MHz For CATV Network
6. RF Interface for CATV End-Users (F-Female)
7. Optical Interface for data SC/PC
9. Aluminum Profiles housing, excellent heat dissipation
performance
10. Much smaller size and very easy install
Read more OPTICAL FIBER OPGW
This specification covers COMCAST® OPGW for the installation on high voltage overhead power lines. The cable contains optical fibers for data transmission and telecom purposes and is installed instead of a ground wire. The specification describes the basic design of COMCAST® OPGW with its main components: the fibers, the optical fiber unit and the cable armoring. Furthermore this specification contains information concerning the quality assurance during manufacturing, the final acceptance tests, the type tests and the packaging.Fiber ADSS Span 100
Loose tube construction, tubes jelly filled, elements (tubes and filler rods) laid up around non-metallic central strength member, polyester yarns used to bind the cable core, water blocking tape wrapped of the cable core, aramid yarn reinforced and PE outer sheath. the prices is for 1 KM, and the purchase is for 5 KM reelGQ-3650DR
High density and all-in-one multi functional QAM modulator devolped by GOSPELL. It combines RF receiving & demodulation, TS re-multiplexing, scrambling and QAM modulation into 1RU, and provides two kinds of RF demodulation options; either QPSK/8PSK or QAM demodulation can be selected according to operators’ needs. Moreover, the GQ-3650DR supports up to eight channels of input transport streams from ASI interfaces. Therefore, with this product, operators obtain lower cost expenditure, lower energy consumption and minimized space of racks occupied. This all comes from the benefits of GQ-3650DR’s high density and all-in-one design.OPN-Micro55MT
2. Designed for FTTH (Fiber to The Home Network) 3. No Power Required 4.Lensed protection and high responsivity PD for more performance 5. Excellent Linearity and Flatness 6. Frequency range 40-1000MHz For CATV End-users 7. Optical Connector: SC/APC 8. Aluminum Profiles casing, excellent heat dissipation performance 9. Small and Cute Design for Easy Handling 10. Good RF Shielding Protection 11.Built-in 1310/1490nm filter, suitable for single-fiber triple wavelength system, RFTV operating Wave length 1550nm.
Fiber optic tool cases prepared for the diverse types of finishing, inspection and cleaning that are needed in fiber optic and
FTTH installations:
• Inspection and cleaning of all fiber optic assemblies made.
• installation and testing FTTH Fiber Optic networks.
• preparation of fiber optic mergers in an FTTH network.
• tools and materials needed to terminate connectors cleanly and easily.
Read more ADSS Single PP
Loose tube construction, tubes water blocking yarn filled, elements (tubes and filler rods) laid up around non-metallic central strength member, polyester yarns used to bind the cable core, water blocking tape wrapped around the cable core, PE inner sheath, then aramid yarns and PE outer sheath.
OPN8602S series are our universal CATV network optical receiver with network management transponder. The pre-amp adopts all-GaAs MMIC amplify and the post-amp adopts GaAs power double amplify module (This series has two models, M model RF attenuation and equilibrium adopt the continuously adjustable design, MF model with different fixed attenuation and equilibrium inserters for user option. Users can also choose more targeted high quality modules according to actual requirements). Optimized circuit design, coupled with our years professional RF design experience, the equipment achieve high performance index. It is an ideal model for CATV network.
(all price in USD)
Read more EDFA 19dB x 8 Outs
- Output ports: 8, 16 32 (optional)
- Optical output power: total output up to 10W
- Low noise figure: <5dB when input is 0dBm
- Perfect network management interface, in line with standard SNMP network management
- Intelligent temperature control system make the power consumption lower
Micronodo Passive 55M
➢ Model Number: XFO HN001F ➢ Designed For FTTH (Fiber To The Home Network) ➢ No Power Required ➢ Exelent Linearity and Flatness ➢ Frequency range 40-1000MHz For CATV End-users ➢ Optical Connector: SC/APC ➢ PVC Casing(Actractive customized case colours) ➢ With RF Shielding Protection
1. Designed for triple play FTTH
2. Build-in WDM Technology applied to GEPON/GPON System
3. AGC Function Optional
4. Frequency range 40-860MHz For CATV Network
5. Voltage supply: DC Adaptor & RF Port
6. RF Interface for CATV
7. Optical Output Interface for data SC/APC or SC/PC option
8. Smaller size and easier install
9. Red-LED Power Indication
10. Green-LED Optical Power Indication
Read more ZTE ONT F660
GPON Optical Network Terminal designed fot FTTH scenario. It support L3 function to help suscribers construct intelligent home network. It provides subscriber ricj, color full,individualized, convenient and confortable service including voice, video ( IPTV) and high speed intenet accessOPN8601G Optical Workstation
Four (4) independent RF output with optical Automatic Gain Control (AGC), any optical node in one optical network, if only the optical power range is within -7dBm~+2dBm,we don’t need adjust the attenuating value of the attenuator of this machine, we can ensure the output level of the whole machine remain the same, and CTB & CSO are remained unchanged, it is easy for debugging the project.OPN-MicroF860AC
• Designed For FTTH(Fiber To The Home Network) • Excellent Linearity and flatness • Frequency range 40-1000MHz For CATV End-users • Voltage supply: +6V~18V(DC) • Optical Connector: SC/APC 6. Aluminum Profiles housing,excellent heat dissipation performance • Smaller size and easier install • Red-LED Power Indication • Green-LED Optical Power Indication(Optical power >- 10dBm)WOS4000
The WOS4000 optical communication platform is the brand-new 3rd generation product based on professional experience in development, manufacturing, and sales of CATV transmission equipment over 20 years. It provides powerful function and flexible configuration in HFC optical data transmission solutions. The standard 4RU metal rack contains sixteen compact slots and each can be installed any functional module able to perform hot plug. Built-in dual-power hot backup, efficient fan cooling and appropriate redundant backup of functional modules contribute to carrier-class reliability.ADSS Doube PBT
Loose tube construction, tubes jelly filled, elements (tubes and filler rods) laid up around non-metallic central strength member, polyester yarns used to bind the cable core, water blocking tape wrapped around the cable core, PE inner sheath, then aramid yarns and PE outer sheath.EDFA 19dB x 32 Outs
- Output ports: 16 or 32 (optional) Optical output power: total output up to 23W
- Low noise figure: <5dB when input is 0dBm
- Perfect network management interface, in line with standard SNMP network management
- Intelligent temperature control system make the power consumption lower
Optical Node OPN8604
New high-end four-output Optical Receiver CATV network, in front of the class-wide GaAsMMIC amplification, after the class for the GaAs amplifier module, optimizing the circuit design, couple with the company for more than a decade of professional design experience, make the machine achieve a high performance, RF attenuation and balanced regulation of the use of fixed insertion attenuation, especially to facilitate debugging the project is to build models the mainstream of CATV networks.ADSS ANTI-RODENT SPAN 200
The ADSS (All Dielectric Self Supported totally dielectric and selfsupporting) fiber optic cable is designed for aerial installations between poles. It also has an Anti-rodent to protect it from rodents, which makes it the perfect cable for installations on towers.Micronodo Passive 55MF
➢ Model Number: XFO HN001F ➢ Designed For FTTH (Fiber To The Home Network) ➢ No Power Required ➢ Exelent Linearity and Flatness ➢ Frequency range 40-1000MHz For CATV End-users ➢ Optical Connector: SC/APC ➢ PVC Casing(Actractive customized case colours) ➢ With RF Shielding ProtectionFTTH- Fast Connector Type Y SC/APC
Fiber optic fast connector designed for FTTH. It is a new generation of fiber connector used in assembly. It can provide open flow and precast type, which optical and mechanical specification meets the standard optical fiber connector. It is designed for high quality and high eddiciency for installation, the structure of crimping position is a unique design.FUSION SPLICE XFO-628
Handheld Fusion Splicer, cost effective and smart appearance, reliable quality, XFO-628 is a special design for the installation, operation and maintenance of optical fiber specially design a precision, durable, convenient optical fiber construction instrument. Widely used in the construction, inspection, maintenance of fiber cable.FTTH- Fast Connector Type Y SC/UPC
Fiber optic fast connector designed for FTTH. It is a new generation of fiber connector used in assembly. It can provide open flow and precast type, which optical and mechanical specification meets the standard optical fiber connector. It is designed for high quality and high eddiciency for installation, the structure of crimping position is a unique design.GYXTW
• Outer Jacket MDPE • Corrugated steel tape covered of Phospated Steel • Loose tube steel ribbon attached with color melt glue • Range of application: for long distance and loca communication • Installation method: in pipeline or underground duct or aerial assembly • Application temperature: -40 ~ +70EDFA 19dB x 16 Outs
- Output ports: 16 or 32 (optional)
- Optical output power: total output up to 10W
- Low noise figure: <5dB when input is 0dBm
- Perfect network management interface, in line with standard SNMP network management
- Intelligent temperature control system make the power consumption lower