Product Description
Multimeter DUT120C
OTDR XFO-2288
Clamp Meter DUT216C
Clamp Meter DUT216C
Dut216C it’s a digital clamp meter are further improved version. It´s double injection design gives user s more comfortable grip and enhanced durability. This is an excellent choice for maintenance and troubleshooting in various industrial and commercial environment.
Producto añadido!
Navegar por Lista de Deseos
El producto ya está en la lista de deseos!
Navegar por Lista de Deseos
Related Products
Multimeter DUT120C
DUT120C is 4000 count notebook, type auto-ranging digital multimeter with fallowing advantage: complete function, stable, performance, high accuracy, low power consumption, novel structure. High. Degree of current. Frequency. Duty cycle, resistance, capacitance, diode forward voltage drops and continuity, and become and ideal choice for measurement.
GC-1803 is a multi-channel professional FTA receiver and decoder with broadcast-quality launched by GOSPELL. This was designed for demodulating and decoding up to eight unscrambled SD MPEG-2, AVC and AVS programs. It supports a wide range of input and output options, coming from DVB-S/S2 satellite, Ethernet network and local DVB-ASI interface, allowing it handle any program sources, decoding output via analog composite video and unbalanced or balanced audio interfaces. It is also highly versatile and can decode up to eight channels SD MPEG-2, AVC, AVS programs in one rack unit
Read more OTDR 4000
Handheld Optical Time Domain Reflectometry is a new generation of intelligent optical-fibre communication instrument. It is able to display the loss distribution curves of optical fibers and optical cables, measure the attenuation factors of optical fibers and optical cables, loss between points and at joints. It is also able to measure the length of optical fibers and optical cables, the distance between two points, identify the connecting, fault, and disconnecting locations of optical fibers and optical cables. It is widely used in the construction, maintenance, measurement, emergency repair of optical-fibre communication system works; also used in the development, manufacturing and measurement of optical fibers and optical cables:
GOSPELL’s GM-2730 series is a multifunctional Network Adapter which performs the adaptation of interfaces between ASI and Gigabit Ethernet, and then multiplex and scramble the MPEG transport streams before sending to local headend system or Ethernet transport network. The GM-2730 series adopts GOSPELL’s flexible licensing mechanism for scrambling functions, with one 100Base-T Ethernet interface available for connection to the conditional access system(CAS) as well as to the network management system(NMS). This flexibility and versatility enables operators to reduce total cost of ownership. It can be widely applied to central head-end and remote headend system in CATV, DTT and SATV networks.
Read more
VISUAL FAULT LOCATOR
Pen design, easy to carry and use, easy to check fiber faults with visual light, Portable and rugged, has always, flash, slow flash 3 modes of operation, Master switch in the pen tail pipe
• Easy and Accurate Identification - It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area.
Read more Analyzer S7200
TV Signal Analyzer provides fast, easy real-time analysis and monitoring of terrestrial, cable, and satellite TVsignals (8VSB, QAM [J.83A/C/C2], QPSK, 8PSK, and PAL,SECAM, & NTSC RF Channels). The range of capabilities offered by the S7200 includes all measurements requiredto install, maintain, and troubleshoot 8VSB transmitters and includes complete RF analysis and logging, along with transport stream recording.
Hand-Held intelligent equipment for Optical Fiber Testing and data transmission, with the capacity of Optical Fiber length tests, Db loss, signal quality, etc. It provides quickly and accurately the point of failure of the Fiber Optic link. The best way to build and maintain Fiber Optic networks.
Read more GN-1846
Is a multichannel H.264 high-definition encoder It can perform up to 4 high-definition and low-bit-rate audio and video encoding functions on a single board. Support 4-channel audio and video coding, encoded audio and video ES packet by TS flow through an IP channel to UDP/RTMP output, in device management, support Web network management, and support for online control program upgrades.FIBER IDENTIFIER TM501
Optical Fiber Identifier is an important tool for optical maintenance, which is used for nondestructive fiber identification project. Meanwhile it also has Visual Fault Locator module with fault location function and power meter function. Using the macro bending technology on line for nondestructive testing, It can measure the signal direction and power and avoid mis-operation resulting in interrupted lines. Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Doesn’t damage optical fiber, without interrupting communications, and direct detection of 2.5mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumperMINI OTDR T-OT560-A26D
- Nine-in-one function
- The 4.3-inch full-view capacitive touch screen supports multi-touch
- Cover plate type tempered glass panel, don't worry about screen scratch
- Support horizontal version, vertical version, perfect fusion of the two habits of user operations
- Support charging treasure charging, do not worry about the battery is not enough
- In line with the international standards of test data with perfect simulation software, so that your report more simple
- Sink type light port design, so that the instrument light port to get better protection
- Support U disk, SD card and Micro USB export data protection
- Any interface supports screen capture
AE2200E- APC
As the demand for bandwidth continues to soar, with higherthan-ever smartphone and streaming video usage, cable operators must face the challenge deploying fiber deeper into the network. And because efficiency, speed, accuracy, and reliability metrics are key for increasing workforce productivity, the natural conclusion is simple: communications service providers (CSP) require a high-performance, efficient, yet affordable test equipment for installing future networks such as FTTx, RFoG and RF PON.AE8500
The AE8500 is a high precision, high-resolution optical spectrum analyzer with a wavelength range of 1250 ~ 1650nm. Users can test optical signals with excellent accuracy, and the 12.1" LCD touchscreen and concise UI design make the AE8500 easy to master. It also provides customizable CWDM/DWDM testing, in-band OSNR, light source, EDFA, fiber probe, auto testing, and more. The AE8500 meets the optical spectrum analysis requirements for several years to come - at superior cost-performance.XFO-520B Optical Power Meter
XFO520 a PON Power Meter (pon test instrument) is specially designed for PON network construction and maintenance which can be connected between OLT and ONT. The voice, data, video signal (1310/1490/1550) online can be measured synchronously and optical power value (1310/1490/1550) can be displayed with this meter. It’s a useful site test tool for the engineers of PON network and maintenance operators. Notice: There are two connector’s type of PON Power Meter: SC/PC and SC/APC, default connector is SC/APC Customers must specify the connector type before ordering this modeFIBER IDENTIFIER TM-OFI 401L
---Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Does not damage optical fiber, without interrupting communications, and direct detection of 25mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumper. ---Tone identification, Optical Fiber Identifier can detect optical signals in the tone signal a fixed load, 270Hz, 1KHz and 2KHz, to identify a specific optical fiber, can quickly find the necessary fiber. ---Build in VFL function.The output power of Optical Fiber Identifier is 10 mW.(Optional function) ---Low battery monitoring function, when battery power is insufficient , the Low battery LED will remind users to change batteries.
The DS2500Q is a rugged, handheld tool for installation, maintenance and troubleshooting HFC networks. This compact and simple-to-use instrument has an integrated DOCSIS 3.0 cable modem and supports all types of QAM and analog signal measurements such as HUM, modulation depth, MER, BER, constellation display, spectrum, power level and sweep.
Read more
GQ‐8398Q is a new generation, highly integrated SD encoder and QAM transmodulator, combining MPEG‐2 and MPEG‐4 AVC SD encoding, QAM RF reception, transport stream processing and QAM modulation in a 1RU chassis. It’s ideal for broadcasters, cable network operators and media providers looking to reduce equipment costs and lower total power consumption for digital television distribution.
Read more
GC-1808 is a high density, versatile professional receiver, multiplexer and scrambler, and was designed to receive up to eight FTA or BISS encrypted SD and HD broadcast streams from satellite (or cable, terrestrial) network in 1RU.
The GC-1808 Series features multiple options, high density and superior performance, provides up to five RF demodulation options, including DVB-S/S2 satellite, DVB-C cable, DTMB, ATSC and ISDB-Tb terrestrial input, each option with a maximum eight channels of inputs simultaneously. It deliver quadruple or better system capacity for operators compared with the professional IRD on the market today.
Read more