Product Description
FIBER IDENTIFIER
DIGITAL MEASURER CATV
Visual Fault Locator
VISUAL FAULT LOCATOR
Pen design, easy to carry and use, easy to check fiber faults with visual light, Portable and rugged, has always, flash, slow flash 3 modes of operation, Master switch in the pen tail pipe
• Easy and Accurate Identification – It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area.
Producto añadido!
Navegar por Lista de Deseos
El producto ya está en la lista de deseos!
Navegar por Lista de Deseos
Related Products
ADSS Span 250
Loose tube construction, tubes jelly filled, elements (tubes and filler rods) laid up around non-metallic central strength member, polyester yarns used to bind the cable core, compound filled in the apertures of the cable core, then PE inner sheath, aramid yarn reinforced and PE outer sheath.
The DS2500Q is a rugged, handheld tool for installation, maintenance and troubleshooting HFC networks. This compact and simple-to-use instrument has an integrated DOCSIS 3.0 cable modem and supports all types of QAM and analog signal measurements such as HUM, modulation depth, MER, BER, constellation display, spectrum, power level and sweep.
Read more OTDR AE1001
The last thing a fiber maintenance technician needs is a double armful of bulky, feature-bloated equipment to bog down the job. The new AE1001 from Deviser Instruments is a sleek, zerofuss OTDR weighing less than 1 kg that tests the common 1310 & 1550nm wavelengths in 5s flat. Low power consumption and a solid 2500mAH battery allow the AE1001 to run automated, manual, or real-time tests continuously for over 4 hours, and are supplemented with the always-handy OPM and VFLCS-6 Cleaver
Bare fiber diameter: 0.25mm~ 0.9mm Outercoat diameter: 125 (micro)m Fiber type: Single tube fiber and ribbon fiber (Exchangeable) Cleaved Length: 9~16mm (Φ0.25) 10~16(Φ0.9) Cleaved Angle: 0.5 °C Blade life: 36000 cleaves Mode: Semiautomatic Dimension: 59mm (W)* 55mm(D)* 49mm(H) Weight: 255g ]EDFA 19dB x 8 Outs
- Output ports: 8, 16 32 (optional)
- Optical output power: total output up to 10W
- Low noise figure: <5dB when input is 0dBm
- Perfect network management interface, in line with standard SNMP network management
- Intelligent temperature control system make the power consumption lower
Hand-Held intelligent equipment for Optical Fiber Testing and data transmission, with the capacity of Optical Fiber length tests, Db loss, signal quality, etc. It provides quickly and accurately the point of failure of the Fiber Optic link. The best way to build and maintain Fiber Optic networks.
Read more EDFA 19dB x 16 Outs
- Output ports: 16 or 32 (optional)
- Optical output power: total output up to 10W
- Low noise figure: <5dB when input is 0dBm
- Perfect network management interface, in line with standard SNMP network management
- Intelligent temperature control system make the power consumption lower
Fiber ADSS Span 100
Loose tube construction, tubes jelly filled, elements (tubes and filler rods) laid up around non-metallic central strength member, polyester yarns used to bind the cable core, water blocking tape wrapped of the cable core, aramid yarn reinforced and PE outer sheath. the prices is for 1 KM, and the purchase is for 5 KM reelXFO-306
Fiber Identifier is a tool necessary for be maintenance of optical fibers used to identify be optical fibers not yet damage. It can detect anywhere in single-mode fiber and multiple mode fiber- During the maintenance, installation, wiring fiber without interruption our business. By transmitting the signal with modulation sound (270Hz, 1KHz, 2KHz) into one end of fiber 1310nm or 1550nm, the identifier can identify the fiber from the route, Fiber identifier can indicate thebusiness direction.EDFA 8 outs
➢ Adopts Er Yb Codoped double-clad fiber technology ➢ Output ports: 8-16-32 optional ➢ Optical output power: total output up to 3W ➢ Low noise figure: <5dB when input is 0dBm ➢ Perfect network management interface support web English Brower, in line with standard SNMP network management; ➢ Intelligent temperature control system make the power consumption lower All our prices is in USDAmplifier Bi-directional 35-90V
Outdoor trunk bidirectional amplifier is mainly used for bidirectional trunk transmission of CATV television image signal, digital TV signa, and telephone voice signals and data (or compressed data) signal. Advanced and mature circuits, scientific and reasonable process structures and high quality materials, ensure the excellent performance. It is the first choice equipment to build large or middle- sized CATV bidirectional transmission network. +FUSION SPLICE XFO600
The machine employs high-speed image processing technology and special positioning technology, allowing the total process of fusion splicing to be finished within 10 seconds. Large-screen LCD clearly demonstrates every stage of optical-fiber fusion splicing. As the machine is compact in size, light in weight, it is ideal to work in outdoor environment. In addition, it is easy to operate, fuses fast, with low fusion loss, especially suitable for the construction and maintenance of the optical-fiber works built in a wide range of sectors including telecommunications, broadcast & TV, railway, petrochem, electricity, army, police, as well as teaching and research of scientific institutes. In order to finish the fusion operations more accurately, please thoroughly read this Manual. All our prices is in USD
Fiber optic tool cases prepared for the diverse types of finishing, inspection and cleaning that are needed in fiber optic and
FTTH installations:
• Inspection and cleaning of all fiber optic assemblies made.
• installation and testing FTTH Fiber Optic networks.
• preparation of fiber optic mergers in an FTTH network.
• tools and materials needed to terminate connectors cleanly and easily.
Read more
The DS2580C is a rugged, handheld tool for installation, maintenance and troubleshooting HFC networks. This compact and simple-to-use instrument has an integrated DOCSIS 3.0 cable modem and supports all types of QAM and analog signal measurements such as HUM, modulation depth, MER, BER, constellation display, spectrum, power level and sweep. Supports up to 1.22 GHz.
[/vc_row
Read more