Showing 1–12 of 60 results
KU Wall-mount Gabinete 6U
- Various sizes and parts are available according to different application demand.
- Completely welded structure, firm and reliable.
- Cable in/out access at the top, bottom and rear for convenient cabling on site.
- Embedded side panel, tool free in assembling and dismantling, lock is optional.
- Front door can be dismantled and change from right to left quickly without tools, opening angle 180°, convenient for equipment’s installation and maintenance.
- Providing several copper grounding studs. Castor or adjustable feet is optional for fix to the ground.
- Maximum static loading is 25~55kgs. Surface treatment procedure is degreasing-->pickling- ->anti-rust and phosphorylation-->water cleaning-- >powder coating, RoHS compliant.
KOB SERIES STEEL OPEN RACK
- Modular design, easy to mounting and dismantle for saving cost
- Knock down package to lower down transport cost
- With grounding device
- Parts are optional, such as cable trough, cable management rail
- Surface treatment procedure is degreasing-->pickling-->anti-rust and phosphorization-->water cleaning-->powder coating, RoHS compliant.
F-E20K1FSC Media Converter 10/100 20km
The HT101 media converter is completely transparent when connected so the network performsexactly the way it did before - only now, it allows the co-existence of bothcopper and fiber mediums. Added flexibility is available with ST, SC, FC and WDM Simplex SC connectors. Extra distances are possible with the single modeversion delivering up to 80kmconnectivity per transmitted segment
Media Converter 10/100 20km
The HT101 series existing Fast Ethernet networks. The easy implementation and expansion of 100Base-TX/FX networks can be further assured with this converter. The HT101 media converter is completely transparent when connected so the network performs exactly the way it did before - only now, it allows the co-existence of both copper and fiber mediums. Added flexibility is available with ST, SC, FC and WDM Simplex SC connectors. Extra distances are possible with the single mode version delivering up to 80kmconnectivity per transmitted segment.
EDFA 23dB x 32 Outs
- Output ports: 16 or 32 (optional) Optical output power: total output up to 23W
- Low noise figure: <5dB when input is 0dBm
- Perfect network management interface, in line with standard SNMP network management
- Intelligent temperature control system make the power consumption lower
EDFA 19dB x 32 Outs
- Output ports: 16 or 32 (optional) Optical output power: total output up to 23W
- Low noise figure: <5dB when input is 0dBm
- Perfect network management interface, in line with standard SNMP network management
- Intelligent temperature control system make the power consumption lower
Mini TX1550nm
1. GaAs Active Devices, designed For FTTH (Fiber To The Home) Network 2. Voltage supply: +6V~18V(DC) 3. Frequency range 40-1000MHz. 4.Excellent Linearity and flatness 5. Aluminum Profiles housing, excellent heat dissipation performance 6.Smaller size and easier install 7. Red-LED Power Indication 8. RF "F" Connector In and Optical Wavelength Output 1310nm & 1550nm or customized
GOS3508B Tuner to IP Gateway
GOS3508B Tuner to IP Gateway is a head-end interface conversion device which supports MPTS and SPTS output switchable. It supports 16 MPTS or 512 SPTS output over UDP and RTP/RTSP protocol. It is integrated with tuner demodulation (or ASI input) and gateway function, which can demodulate the signal from 16 tuners into IP package, or directly convert the TS from ASI input and tuner into IP package, then output the IP package through different IP address and ports. BISS function is also embedded for tuner input to descramble your tuner input programs.
QAM Modulator GOS3343D
GOS3343D is a high performance and cost-effective mux-scrambling QAM modulator. It has multiple input ports optional. After multiplexing, scrambling and QAM modulating process, then it gives 4 RF output. To meet customers’ various requirements, this device is also equipped with IP port to output 4 MPTS over UDP. Its pluggable structure design greatly facilitates the change of modules (demodulator) as needed. The four CAMs/CIs (Optional) accompanied and BISS modules can descramble the programs input from 4 Tuner inputs. Its pluggable structure design greatly facilitates the change of modules (demodulator) as needed. GOS3343D is also characterized with high integrated level, high performance and low cost. This is very adaptable to newly generation CATV broadcasting system.
SKD-162X 16 Channel Agil Modulator
The SKD162X is a professional quality agile modulator with 16 output channels in 1RU size. It is SAW filtered and microprocessor controlled with an output capability of 860MHz. Setup and tuning are easy and simple by the front panel. The unit offers high performance, low cost and compact design for the system operators.
Encoder GOS3242A
GOS3242A 4‐in‐1 MPEG2/H.264 HD Encoder are new professional HD audio & video encoding device with powerful functionality. It has equipped with 4 HD‐SDI or 4 HDMI channels input supporting MPEG‐2 and MPEG‐4 AVC/H.264 video encoding and MPEG‐1 Audio layer 2, LC‐AAC, HE‐AAC and DD AC3 audio encoding. The 4 encoded programs will output through ASI and IP ports in MPTS or SPTS. It adopts inner drawer‐type structural design which greatly facilitates the change of encoding modules if needed. It is equipment with 16/32 CVBS channels input. It can multiplex the 16/32 encoded TS to generate a MPTS and 16/32 SPTS output through GE output port and one MPTS output through 2 ASI output ports. In conclusion, its high integration and cost-effective design make this device widely used in variety of digital distribution systems such as CATV digital head-end, satellite and terrestrial digital TV, etc.