Showing 1–12 of 59 results
ADSS 144 core Single Jacket
Loose tube construction, tubes jelly filled, elements (tubes and filler rods) laid up around non-metallic central strength member (FRP), polyester yarns used to bind the cable core, compound filled in the apertures of the cable core.ADSS 144 core
Loose tube construction, tubes jelly filled, elements (tubes and filler rods) laid up around non-metallic central strength member (FRP), polyester yarns used to bind the cable core, compound filled in the apertures of the cable core.DROP Fiber GJYXFH-1B6 Dialectric
The optical fiber drop cable shall have sequentially numbered length marking at intervals of approximately 1 meter. The starting number of ordering length for any coil shall begin whit zero meter. The accuracy of the measurement of lenth marking shall be held within the limits of ±1%.AIR BLOWING DUCT FIBER
Optical Fibers are housed in loose tubes that are made of high-modulus plastic and filled with tube filling compound. The tubes (and fillers) are stranded around a non-metallic central strength member andsurrounded with dry water-blocking material to form a cable core. An extremely thin outer PE sheath is extruded outside the core.OPTICAL FIBER ASU
G.652D Aerial Self-Supported ASU Fiber Optic Cable has a loose tube structure and water-resistant gel compound to provide crucial protection for the fiber. Over the tube, water-blocking material is applied to keep the cable watertight. Two parallel fiber reinforced plastic (FRP) elements are placed on the two sides. The cable is covered with a single PE outer sheath. It is especially suitable for installation in aerial for long-distance communicationRG6 Bishield 90%
|
|||||||||||||||||||||||||||||
RG6 Bishield 90% with Messenge
Specificaiton | |||
No | Description | Material | Notes |
I | Center Conductor | opper Clad Steel (25% IAC | (DI mm |
2 | Dielectric | Gas Injected Foam PE | 04.57mm Nominal |
3 | Foil Shield | Al/Polyester/Al Laminated Tape Bonded to Dielectric | 04.78mm Nominal Overlap 18% Minimum |
4 | Braid Shield | Al Braid Wire | 144/0.12mm, |
5 | Jacket | PVC, Black | 06.93±0.2mm |
6 | Messenger | Zinc Coated Carbon Steel | 01.30±0.05mm |