Product Description
EP300 PON optical power meter
DS2500Q Digital TV QAM Analyzer
AE8500 Optical Spectrum Analayzer
AE8500
The AE8500 is a high precision, high-resolution optical spectrum analyzer with a wavelength range of 1250 ~ 1650nm. Users can test optical signals with excellent accuracy, and the 12.1″ LCD touchscreen and concise UI design make the AE8500 easy to master. It also provides customizable CWDM/DWDM testing, in-band OSNR, light source, EDFA, fiber probe, auto testing, and more. The AE8500 meets the optical spectrum analysis requirements for several years to come – at superior cost-performance.
Producto añadido!
Navegar por Lista de Deseos
El producto ya está en la lista de deseos!
Navegar por Lista de Deseos
Category: Measure equipment
Tag: All our prices are in USD
Related Products
OTDR AE1001
The last thing a fiber maintenance technician needs is a double armful of bulky, feature-bloated equipment to bog down the job. The new AE1001 from Deviser Instruments is a sleek, zerofuss OTDR weighing less than 1 kg that tests the common 1310 & 1550nm wavelengths in 5s flat. Low power consumption and a solid 2500mAH battery allow the AE1001 to run automated, manual, or real-time tests continuously for over 4 hours, and are supplemented with the always-handy OPM and VFL
VISUAL FAULT LOCATOR
Pen design, easy to carry and use, easy to check fiber faults with visual light, Portable and rugged, has always, flash, slow flash 3 modes of operation, Master switch in the pen tail pipe
• Easy and Accurate Identification - It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area.
Read more GN-1846
Is a multichannel H.264 high-definition encoder It can perform up to 4 high-definition and low-bit-rate audio and video encoding functions on a single board. Support 4-channel audio and video coding, encoded audio and video ES packet by TS flow through an IP channel to UDP/RTMP output, in device management, support Web network management, and support for online control program upgrades.AE3100C
Featuring intuitive touchscreen controls, real-time data analysis, and more, the AE3100 is the ideal test instrument for constructing, deploying, maintaining, and authenticating FTTx networks - as well as verifying access networks. Multiple models and configuration options ensure your unique measurement needs are covered. Dual or multiple wavelengths and a choice of dynamic ranges (spanningfrom 28 to 39dB) are also availableMINI OTDR T-OT560-A26D
- Nine-in-one function
- The 4.3-inch full-view capacitive touch screen supports multi-touch
- Cover plate type tempered glass panel, don't worry about screen scratch
- Support horizontal version, vertical version, perfect fusion of the two habits of user operations
- Support charging treasure charging, do not worry about the battery is not enough
- In line with the international standards of test data with perfect simulation software, so that your report more simple
- Sink type light port design, so that the instrument light port to get better protection
- Support U disk, SD card and Micro USB export data protection
- Any interface supports screen capture
GQ‐8398Q is a new generation, highly integrated SD encoder and QAM transmodulator, combining MPEG‐2 and MPEG‐4 AVC SD encoding, QAM RF reception, transport stream processing and QAM modulation in a 1RU chassis. It’s ideal for broadcasters, cable network operators and media providers looking to reduce equipment costs and lower total power consumption for digital television distribution.
Read more Micronodo Passive 55MF
➢ Model Number: XFO HN001F ➢ Designed For FTTH (Fiber To The Home Network) ➢ No Power Required ➢ Exelent Linearity and Flatness ➢ Frequency range 40-1000MHz For CATV End-users ➢ Optical Connector: SC/APC ➢ PVC Casing(Actractive customized case colours) ➢ With RF Shielding ProtectionFIBER IDENTIFIER TM-OFI 401L
---Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Does not damage optical fiber, without interrupting communications, and direct detection of 25mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumper. ---Tone identification, Optical Fiber Identifier can detect optical signals in the tone signal a fixed load, 270Hz, 1KHz and 2KHz, to identify a specific optical fiber, can quickly find the necessary fiber. ---Build in VFL function.The output power of Optical Fiber Identifier is 10 mW.(Optional function) ---Low battery monitoring function, when battery power is insufficient , the Low battery LED will remind users to change batteries.
Hand-Held intelligent equipment for Optical Fiber Testing and data transmission, with the capacity of Optical Fiber length tests, Db loss, signal quality, etc. It provides quickly and accurately the point of failure of the Fiber Optic link. The best way to build and maintain Fiber Optic networks.
Read more
The DS2500Q is a rugged, handheld tool for installation, maintenance and troubleshooting HFC networks. This compact and simple-to-use instrument has an integrated DOCSIS 3.0 cable modem and supports all types of QAM and analog signal measurements such as HUM, modulation depth, MER, BER, constellation display, spectrum, power level and sweep.
Read more
GC-1815 is the latest professional IRD launched by GOSPELL, and was designed to demodulate the scrambled broadcast streams from satellite (or cable, terrestrial) network, IP network and local headend featured with DVB-ASI. In order to cater for demands of interoperability of different operators broadcast services, GC-1815 is equipped with two DVB-CI complied Common Interfaces to meet the demands of descrambling for different scrambled programs using different DVB SimulCrypt CA(s), and supports up to 140Mbps of de-scrambling output bit rates for SD, HD and Full HD MPEG-2, MPEG-4 AVC, AVS and AVS+ broadcast services. It supports various decoding output interfaces, composite video, unbalanced stereo audio, HDMI and 3G-SDI outputs, It can be widely used for broadcast distribution and contribution.
[/vc_column_text][/vc_column][/vc_row]
Read more
With the number of channel increasing fast, DTV operators require the ability to have a multi-channel transcoding solution to simplify their headend architecture and to reduce the amount of headend equipment needed. To achieve this, they need products able to deal with multi-channel MPEG-2 and MPEG-4 AVC video streams. GOSPELL’s GN-1772 a new generation of modular & high density SD video and audio conversion unit with best-in-class video quality. It supports up to 36/72 channels MPEG-2/MPEG-4 AVC SD live video and audio services transcoding with IP in and out by using six external pluggable transcoding modules for broadcast and Over-The-Top(OTT) applications
[/vc_column_text][/vc_column][/vc_row]
Read more XFO-520B Optical Power Meter
XFO520 a PON Power Meter (pon test instrument) is specially designed for PON network construction and maintenance which can be connected between OLT and ONT. The voice, data, video signal (1310/1490/1550) online can be measured synchronously and optical power value (1310/1490/1550) can be displayed with this meter. It’s a useful site test tool for the engineers of PON network and maintenance operators. Notice: There are two connector’s type of PON Power Meter: SC/PC and SC/APC, default connector is SC/APC Customers must specify the connector type before ordering this mode
GOSPELL’s GM-2730 series is a multifunctional Network Adapter which performs the adaptation of interfaces between ASI and Gigabit Ethernet, and then multiplex and scramble the MPEG transport streams before sending to local headend system or Ethernet transport network. The GM-2730 series adopts GOSPELL’s flexible licensing mechanism for scrambling functions, with one 100Base-T Ethernet interface available for connection to the conditional access system(CAS) as well as to the network management system(NMS). This flexibility and versatility enables operators to reduce total cost of ownership. It can be widely applied to central head-end and remote headend system in CATV, DTT and SATV networks.
Read more
GC-1808 is a high density, versatile professional receiver, multiplexer and scrambler, and was designed to receive up to eight FTA or BISS encrypted SD and HD broadcast streams from satellite (or cable, terrestrial) network in 1RU.
The GC-1808 Series features multiple options, high density and superior performance, provides up to five RF demodulation options, including DVB-S/S2 satellite, DVB-C cable, DTMB, ATSC and ISDB-Tb terrestrial input, each option with a maximum eight channels of inputs simultaneously. It deliver quadruple or better system capacity for operators compared with the professional IRD on the market today.
Read more