Product Description
AE8500 Optical Spectrum Analayzer
DS2580C Digital TV QAM Analyzer
DS2500Q Digital TV QAM Analyzer
The DS2500Q is a rugged, handheld tool for installation, maintenance and troubleshooting HFC networks. This compact and simple-to-use instrument has an integrated DOCSIS 3.0 cable modem and supports all types of QAM and analog signal measurements such as HUM, modulation depth, MER, BER, constellation display, spectrum, power level and sweep.
Producto añadido!
Navegar por Lista de Deseos
El producto ya está en la lista de deseos!
Navegar por Lista de Deseos
Category: Measure equipment
Tag: All our prices are in USD
Related Products
FIBER IDENTIFIER TM-OFI 401L
---Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Does not damage optical fiber, without interrupting communications, and direct detection of 25mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumper. ---Tone identification, Optical Fiber Identifier can detect optical signals in the tone signal a fixed load, 270Hz, 1KHz and 2KHz, to identify a specific optical fiber, can quickly find the necessary fiber. ---Build in VFL function.The output power of Optical Fiber Identifier is 10 mW.(Optional function) ---Low battery monitoring function, when battery power is insufficient , the Low battery LED will remind users to change batteries.GN-1846
Is a multichannel H.264 high-definition encoder It can perform up to 4 high-definition and low-bit-rate audio and video encoding functions on a single board. Support 4-channel audio and video coding, encoded audio and video ES packet by TS flow through an IP channel to UDP/RTMP output, in device management, support Web network management, and support for online control program upgrades.
Hand-Held intelligent equipment for Optical Fiber Testing and data transmission, with the capacity of Optical Fiber length tests, Db loss, signal quality, etc. It provides quickly and accurately the point of failure of the Fiber Optic link. The best way to build and maintain Fiber Optic networks.
Read more
The DS2580C is a rugged, handheld tool for installation, maintenance and troubleshooting HFC networks. This compact and simple-to-use instrument has an integrated DOCSIS 3.0 cable modem and supports all types of QAM and analog signal measurements such as HUM, modulation depth, MER, BER, constellation display, spectrum, power level and sweep. Supports up to 1.22 GHz.
[/vc_row
Read more AE3100C
Featuring intuitive touchscreen controls, real-time data analysis, and more, the AE3100 is the ideal test instrument for constructing, deploying, maintaining, and authenticating FTTx networks - as well as verifying access networks. Multiple models and configuration options ensure your unique measurement needs are covered. Dual or multiple wavelengths and a choice of dynamic ranges (spanningfrom 28 to 39dB) are also available
TheGN-1866 is a dual-channel H.265/H.264 high-definition encoder developed on the Hi Silicon Hi 3519V 101 high-definition encoding chip. The single-board card can accomplish up to two high-definition and low-bit-rate audio and video coding functions, Each sub board support s2 channels of audio and video coding. The encoded audio and video ES is packet ized into TS streams and output as UDP through 1 IP channel. In device management, it supports Web network management and supports online up grade of control programs
Read more Multimeter DUT120C
DUT120C is 4000 count notebook, type auto-ranging digital multimeter with fallowing advantage: complete function, stable, performance, high accuracy, low power consumption, novel structure. High. Degree of current. Frequency. Duty cycle, resistance, capacitance, diode forward voltage drops and continuity, and become and ideal choice for measurement.MINI OTDR T-OT560-A26D
- Nine-in-one function
- The 4.3-inch full-view capacitive touch screen supports multi-touch
- Cover plate type tempered glass panel, don't worry about screen scratch
- Support horizontal version, vertical version, perfect fusion of the two habits of user operations
- Support charging treasure charging, do not worry about the battery is not enough
- In line with the international standards of test data with perfect simulation software, so that your report more simple
- Sink type light port design, so that the instrument light port to get better protection
- Support U disk, SD card and Micro USB export data protection
- Any interface supports screen capture
VISUAL FAULT LOCATOR
Pen design, easy to carry and use, easy to check fiber faults with visual light, Portable and rugged, has always, flash, slow flash 3 modes of operation, Master switch in the pen tail pipe
• Easy and Accurate Identification - It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area.
Read more OPN3327 Insertion/Return Loss Test Station
OPN3327 series Insertion/Return Loss Test Station is a precise instrument, which be adopted latest advantages from current instruments and improved to clients applications. It greatly improves the efficiency of IL test of optical devices which combines the two wavelengths testing result in one short test. It has extensive applications in the fiber cable, fiber passive device, fiber active device and optical communication system. It is suitable to perform the QC testing and sample character testing for fiber manufacturerAnalyzer S7200
TV Signal Analyzer provides fast, easy real-time analysis and monitoring of terrestrial, cable, and satellite TVsignals (8VSB, QAM [J.83A/C/C2], QPSK, 8PSK, and PAL,SECAM, & NTSC RF Channels). The range of capabilities offered by the S7200 includes all measurements requiredto install, maintain, and troubleshoot 8VSB transmitters and includes complete RF analysis and logging, along with transport stream recording.
GC-1815 is the latest professional IRD launched by GOSPELL, and was designed to demodulate the scrambled broadcast streams from satellite (or cable, terrestrial) network, IP network and local headend featured with DVB-ASI. In order to cater for demands of interoperability of different operators broadcast services, GC-1815 is equipped with two DVB-CI complied Common Interfaces to meet the demands of descrambling for different scrambled programs using different DVB SimulCrypt CA(s), and supports up to 140Mbps of de-scrambling output bit rates for SD, HD and Full HD MPEG-2, MPEG-4 AVC, AVS and AVS+ broadcast services. It supports various decoding output interfaces, composite video, unbalanced stereo audio, HDMI and 3G-SDI outputs, It can be widely used for broadcast distribution and contribution.
[/vc_column_text][/vc_column][/vc_row]
Read more
With the number of channel increasing fast, DTV operators require the ability to have a multi-channel transcoding solution to simplify their headend architecture and to reduce the amount of headend equipment needed. To achieve this, they need products able to deal with multi-channel MPEG-2 and MPEG-4 AVC video streams. GOSPELL’s GN-1772 a new generation of modular & high density SD video and audio conversion unit with best-in-class video quality. It supports up to 36/72 channels MPEG-2/MPEG-4 AVC SD live video and audio services transcoding with IP in and out by using six external pluggable transcoding modules for broadcast and Over-The-Top(OTT) applications
[/vc_column_text][/vc_column][/vc_row]
Read more OTDR 4000
Handheld Optical Time Domain Reflectometry is a new generation of intelligent optical-fibre communication instrument. It is able to display the loss distribution curves of optical fibers and optical cables, measure the attenuation factors of optical fibers and optical cables, loss between points and at joints. It is also able to measure the length of optical fibers and optical cables, the distance between two points, identify the connecting, fault, and disconnecting locations of optical fibers and optical cables. It is widely used in the construction, maintenance, measurement, emergency repair of optical-fibre communication system works; also used in the development, manufacturing and measurement of optical fibers and optical cables:
GOSPELL’s GM-2730 series is a multifunctional Network Adapter which performs the adaptation of interfaces between ASI and Gigabit Ethernet, and then multiplex and scramble the MPEG transport streams before sending to local headend system or Ethernet transport network. The GM-2730 series adopts GOSPELL’s flexible licensing mechanism for scrambling functions, with one 100Base-T Ethernet interface available for connection to the conditional access system(CAS) as well as to the network management system(NMS). This flexibility and versatility enables operators to reduce total cost of ownership. It can be widely applied to central head-end and remote headend system in CATV, DTT and SATV networks.
Read more