Product Description
AE8500 Optical Spectrum Analayzer
DS2580C Digital TV QAM Analyzer
DS2500Q Digital TV QAM Analyzer
The DS2500Q is a rugged, handheld tool for installation, maintenance and troubleshooting HFC networks. This compact and simple-to-use instrument has an integrated DOCSIS 3.0 cable modem and supports all types of QAM and analog signal measurements such as HUM, modulation depth, MER, BER, constellation display, spectrum, power level and sweep.
Producto añadido!
Navegar por Lista de Deseos
El producto ya está en la lista de deseos!
Navegar por Lista de Deseos
Category: Measure equipment
Tag: All our prices are in USD
Related Products
TheGN-1866 is a dual-channel H.265/H.264 high-definition encoder developed on the Hi Silicon Hi 3519V 101 high-definition encoding chip. The single-board card can accomplish up to two high-definition and low-bit-rate audio and video coding functions, Each sub board support s2 channels of audio and video coding. The encoded audio and video ES is packet ized into TS streams and output as UDP through 1 IP channel. In device management, it supports Web network management and supports online up grade of control programs
Read more
VISUAL FAULT LOCATOR
Pen design, easy to carry and use, easy to check fiber faults with visual light, Portable and rugged, has always, flash, slow flash 3 modes of operation, Master switch in the pen tail pipe
• Easy and Accurate Identification - It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area.
Read more
Multi-functional TS descrambre is a new generation of DTV receiver and de-scrambler series. It support ASI input, as well as different types of RF inputs, descrambler devices in the head-end equipements room for DTV network operator. in comparision with traditional single channel TS receiver and descrambler. GC-1818 has much higher performance to price.
Read more XFO-306
Fiber Identifier is a tool necessary for be maintenance of optical fibers used to identify be optical fibers not yet damage. It can detect anywhere in single-mode fiber and multiple mode fiber- During the maintenance, installation, wiring fiber without interruption our business. By transmitting the signal with modulation sound (270Hz, 1KHz, 2KHz) into one end of fiber 1310nm or 1550nm, the identifier can identify the fiber from the route, Fiber identifier can indicate thebusiness direction.AE3100C
Featuring intuitive touchscreen controls, real-time data analysis, and more, the AE3100 is the ideal test instrument for constructing, deploying, maintaining, and authenticating FTTx networks - as well as verifying access networks. Multiple models and configuration options ensure your unique measurement needs are covered. Dual or multiple wavelengths and a choice of dynamic ranges (spanningfrom 28 to 39dB) are also availableGN-1846
Is a multichannel H.264 high-definition encoder It can perform up to 4 high-definition and low-bit-rate audio and video encoding functions on a single board. Support 4-channel audio and video coding, encoded audio and video ES packet by TS flow through an IP channel to UDP/RTMP output, in device management, support Web network management, and support for online control program upgrades.
GC-1803 is a multi-channel professional FTA receiver and decoder with broadcast-quality launched by GOSPELL. This was designed for demodulating and decoding up to eight unscrambled SD MPEG-2, AVC and AVS programs. It supports a wide range of input and output options, coming from DVB-S/S2 satellite, Ethernet network and local DVB-ASI interface, allowing it handle any program sources, decoding output via analog composite video and unbalanced or balanced audio interfaces. It is also highly versatile and can decode up to eight channels SD MPEG-2, AVC, AVS programs in one rack unit
Read more OTDR AE1001
The last thing a fiber maintenance technician needs is a double armful of bulky, feature-bloated equipment to bog down the job. The new AE1001 from Deviser Instruments is a sleek, zerofuss OTDR weighing less than 1 kg that tests the common 1310 & 1550nm wavelengths in 5s flat. Low power consumption and a solid 2500mAH battery allow the AE1001 to run automated, manual, or real-time tests continuously for over 4 hours, and are supplemented with the always-handy OPM and VFLFIBER IDENTIFIER TM-OFI 401L
---Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Does not damage optical fiber, without interrupting communications, and direct detection of 25mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumper. ---Tone identification, Optical Fiber Identifier can detect optical signals in the tone signal a fixed load, 270Hz, 1KHz and 2KHz, to identify a specific optical fiber, can quickly find the necessary fiber. ---Build in VFL function.The output power of Optical Fiber Identifier is 10 mW.(Optional function) ---Low battery monitoring function, when battery power is insufficient , the Low battery LED will remind users to change batteries.Multimeter DUT120C
DUT120C is 4000 count notebook, type auto-ranging digital multimeter with fallowing advantage: complete function, stable, performance, high accuracy, low power consumption, novel structure. High. Degree of current. Frequency. Duty cycle, resistance, capacitance, diode forward voltage drops and continuity, and become and ideal choice for measurement.
The DS2580C is a rugged, handheld tool for installation, maintenance and troubleshooting HFC networks. This compact and simple-to-use instrument has an integrated DOCSIS 3.0 cable modem and supports all types of QAM and analog signal measurements such as HUM, modulation depth, MER, BER, constellation display, spectrum, power level and sweep. Supports up to 1.22 GHz.
[/vc_row
Read more Optical Fiber identifier KIT XFO308T/I
XFO 308I Optical Fiber Identifier is a crucial tool for optical maintenance, which is used without damage the fiber optic cable, fiber identification work can be detect in any location of both SM and MM fiber. Meanwhile when you combined with XFO 308T Optical Signal Generator, which can realize low-frequency signal live injection, and realize to find a fiber without modulation signal in optical fiber signal.
GC-1815 is the latest professional IRD launched by GOSPELL, and was designed to demodulate the scrambled broadcast streams from satellite (or cable, terrestrial) network, IP network and local headend featured with DVB-ASI. In order to cater for demands of interoperability of different operators broadcast services, GC-1815 is equipped with two DVB-CI complied Common Interfaces to meet the demands of descrambling for different scrambled programs using different DVB SimulCrypt CA(s), and supports up to 140Mbps of de-scrambling output bit rates for SD, HD and Full HD MPEG-2, MPEG-4 AVC, AVS and AVS+ broadcast services. It supports various decoding output interfaces, composite video, unbalanced stereo audio, HDMI and 3G-SDI outputs, It can be widely used for broadcast distribution and contribution.
[/vc_column_text][/vc_column][/vc_row]
Read more
GC-1808 is a high density, versatile professional receiver, multiplexer and scrambler, and was designed to receive up to eight FTA or BISS encrypted SD and HD broadcast streams from satellite (or cable, terrestrial) network in 1RU.
The GC-1808 Series features multiple options, high density and superior performance, provides up to five RF demodulation options, including DVB-S/S2 satellite, DVB-C cable, DTMB, ATSC and ISDB-Tb terrestrial input, each option with a maximum eight channels of inputs simultaneously. It deliver quadruple or better system capacity for operators compared with the professional IRD on the market today.
Read more
Hand-Held intelligent equipment for Optical Fiber Testing and data transmission, with the capacity of Optical Fiber length tests, Db loss, signal quality, etc. It provides quickly and accurately the point of failure of the Fiber Optic link. The best way to build and maintain Fiber Optic networks.
Read more Analyzer S7200
TV Signal Analyzer provides fast, easy real-time analysis and monitoring of terrestrial, cable, and satellite TVsignals (8VSB, QAM [J.83A/C/C2], QPSK, 8PSK, and PAL,SECAM, & NTSC RF Channels). The range of capabilities offered by the S7200 includes all measurements requiredto install, maintain, and troubleshoot 8VSB transmitters and includes complete RF analysis and logging, along with transport stream recording.
GOSPELL’s GM-2730 series is a multifunctional Network Adapter which performs the adaptation of interfaces between ASI and Gigabit Ethernet, and then multiplex and scramble the MPEG transport streams before sending to local headend system or Ethernet transport network. The GM-2730 series adopts GOSPELL’s flexible licensing mechanism for scrambling functions, with one 100Base-T Ethernet interface available for connection to the conditional access system(CAS) as well as to the network management system(NMS). This flexibility and versatility enables operators to reduce total cost of ownership. It can be widely applied to central head-end and remote headend system in CATV, DTT and SATV networks.
Read more MINI OTDR T-OT560-A26D
- Nine-in-one function
- The 4.3-inch full-view capacitive touch screen supports multi-touch
- Cover plate type tempered glass panel, don't worry about screen scratch
- Support horizontal version, vertical version, perfect fusion of the two habits of user operations
- Support charging treasure charging, do not worry about the battery is not enough
- In line with the international standards of test data with perfect simulation software, so that your report more simple
- Sink type light port design, so that the instrument light port to get better protection
- Support U disk, SD card and Micro USB export data protection
- Any interface supports screen capture
With the number of channel increasing fast, DTV operators require the ability to have a multi-channel transcoding solution to simplify their headend architecture and to reduce the amount of headend equipment needed. To achieve this, they need products able to deal with multi-channel MPEG-2 and MPEG-4 AVC video streams. GOSPELL’s GN-1772 a new generation of modular & high density SD video and audio conversion unit with best-in-class video quality. It supports up to 36/72 channels MPEG-2/MPEG-4 AVC SD live video and audio services transcoding with IP in and out by using six external pluggable transcoding modules for broadcast and Over-The-Top(OTT) applications
[/vc_column_text][/vc_column][/vc_row]
Read more
GQ‐8398Q is a new generation, highly integrated SD encoder and QAM transmodulator, combining MPEG‐2 and MPEG‐4 AVC SD encoding, QAM RF reception, transport stream processing and QAM modulation in a 1RU chassis. It’s ideal for broadcasters, cable network operators and media providers looking to reduce equipment costs and lower total power consumption for digital television distribution.
Read more