TheGN-1866 is a dual-channel H.265/H.264 high-definition encoder developed on the Hi Silicon Hi 3519V 101 high-definition encoding chip. The single-board card can accomplish up to two high-definition and low-bit-rate audio and video coding functions, Each sub board support s2 channels of audio and video coding. The encoded audio and video ES is packet ized into TS streams and output as UDP through 1 IP channel. In device management, it supports Web network management and supports online up grade of control programs                    

The DS2580C is a rugged, handheld tool for installation, maintenance and troubleshooting HFC networks. This compact and simple-to-use instrument has an integrated DOCSIS 3.0 cable modem and supports all types of QAM and analog signal measurements such as HUM, modulation depth, MER, BER, constellation display, spectrum, power level and sweep. Supports up to 1.22 GHz.   [/vc_row

GOSPELL’s GM-2730 series is a multifunctional Network Adapter which performs the adaptation of interfaces between ASI and Gigabit Ethernet, and then multiplex and scramble the MPEG transport streams before sending to local headend system or Ethernet transport network. The GM-2730 series adopts GOSPELL’s flexible licensing mechanism for scrambling functions, with one 100Base-T Ethernet interface available for connection to the conditional access system(CAS) as well as to the network management system(NMS). This flexibility and versatility enables operators to reduce total cost of ownership. It can be widely applied to central head-end and remote headend system in CATV, DTT and SATV networks.            

  GC-1815 is the latest professional IRD launched by GOSPELL, and was designed to demodulate the scrambled broadcast streams from satellite (or cable, terrestrial) network, IP network and local headend featured with DVB-ASI. In order to cater for demands of interoperability of different operators broadcast services, GC-1815 is equipped with two DVB-CI complied Common Interfaces to meet the demands of descrambling for different scrambled programs using different DVB SimulCrypt CA(s), and supports up to 140Mbps of de-scrambling output bit rates for SD, HD and Full HD MPEG-2, MPEG-4 AVC, AVS and AVS+ broadcast services. It supports various decoding output interfaces, composite video, unbalanced stereo audio, HDMI and 3G-SDI outputs, It can be widely used for broadcast distribution and contribution.   [/vc_column_text][/vc_column][/vc_row]  

Micronodo Passive 55MF

➢ Model Number: XFO HN001F ➢ Designed For FTTH (Fiber To The Home Network) ➢ No Power Required ➢ Exelent Linearity and Flatness ➢ Frequency range 40-1000MHz For CATV End-users ➢ Optical Connector: SC/APC ➢ PVC Casing(Actractive customized case colours) ➢ With RF Shielding Protection  

 OTDR AE1001

The last thing a fiber maintenance technician needs is a double armful of bulky, feature-bloated equipment to bog down the job. The new AE1001 from Deviser Instruments is a sleek, zerofuss OTDR weighing less than 1 kg that tests the common 1310 & 1550nm wavelengths in 5s flat. Low power consumption and a solid 2500mAH battery allow the AE1001 to run automated, manual, or real-time tests continuously for over 4 hours, and are supplemented with the always-handy OPM and VFL  

   

Clamp Meter DUT216C

Dut216C it’s a digital clamp meter are further improved version. It´s double injection design gives user s more comfortable grip and enhanced durability. This is an excellent choice for maintenance and troubleshooting in various industrial and commercial environment.        

   

candado F con terminacion 75ohm y rosca

Conectores de compresión para cable RG6 /100 pzas.

VISUAL FAULT LOCATOR Pen design, easy to carry and use, easy to check fiber faults with visual light, Portable and rugged, has always, flash, slow flash 3 modes of operation, Master switch in the pen tail pipe • Easy and Accurate Identification - It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area.    

GC-1803 is a multi-channel professional FTA receiver and decoder with broadcast-quality launched by GOSPELL. This was designed for demodulating and decoding up to eight unscrambled SD MPEG-2, AVC and AVS programs. It supports a wide range of input and output options, coming from DVB-S/S2 satellite, Ethernet network and local DVB-ASI interface, allowing it handle any program sources, decoding output via analog composite video and unbalanced or balanced audio interfaces. It is also highly versatile and can decode up to eight channels SD MPEG-2, AVC, AVS programs in one rack unit  

OPN3327 Insertion/Return Loss Test Station

OPN3327 series Insertion/Return Loss Test Station is a precise instrument, which be adopted latest advantages from current instruments and improved to clients applications. It greatly improves the efficiency of IL test of optical devices which combines the two wavelengths testing result in one short test. It has extensive applications in the fiber cable, fiber passive device, fiber active device and optical communication system. It is suitable to perform the QC testing and sample character testing for fiber manufacturer  

Optical Power Meter 850, 980, 1300, 1310, 1490, 1550, 1625 FC/PC, FC/APC, SC

Fiber Optic Splice Closure 48 Cores

The splice closure has a wide range of applications, with good sealing performance, easy installation, produced with high strength engineering plastic, with anti-aging, corrosion resistance, high temperature and high mechanical strength and so on .