Product Description
DUT681L Cable Tester
Cable Tester DUT681L
DUT681C cable testers can be used to fast check if Ethernet cables are conducting, short-circuit, crossed or open-circuit. They are ideal tools for technicians to install, maintain and inspect week current system circuit.
Producto añadido!
Navegar por Lista de Deseos
El producto ya está en la lista de deseos!
Navegar por Lista de Deseos
SKU: DUT681L
Category: Measure equipment
Related Products
Analyzer S7200
TV Signal Analyzer provides fast, easy real-time analysis and monitoring of terrestrial, cable, and satellite TVsignals (8VSB, QAM [J.83A/C/C2], QPSK, 8PSK, and PAL,SECAM, & NTSC RF Channels). The range of capabilities offered by the S7200 includes all measurements requiredto install, maintain, and troubleshoot 8VSB transmitters and includes complete RF analysis and logging, along with transport stream recording.
VISUAL FAULT LOCATOR
Pen design, easy to carry and use, easy to check fiber faults with visual light, Portable and rugged, has always, flash, slow flash 3 modes of operation, Master switch in the pen tail pipe
• Easy and Accurate Identification - It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area.
Read more FIBER IDENTIFIER TM-OFI 401L
---Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Does not damage optical fiber, without interrupting communications, and direct detection of 25mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumper. ---Tone identification, Optical Fiber Identifier can detect optical signals in the tone signal a fixed load, 270Hz, 1KHz and 2KHz, to identify a specific optical fiber, can quickly find the necessary fiber. ---Build in VFL function.The output power of Optical Fiber Identifier is 10 mW.(Optional function) ---Low battery monitoring function, when battery power is insufficient , the Low battery LED will remind users to change batteries.MINI OTDR T-OT560-A26D
- Nine-in-one function
- The 4.3-inch full-view capacitive touch screen supports multi-touch
- Cover plate type tempered glass panel, don't worry about screen scratch
- Support horizontal version, vertical version, perfect fusion of the two habits of user operations
- Support charging treasure charging, do not worry about the battery is not enough
- In line with the international standards of test data with perfect simulation software, so that your report more simple
- Sink type light port design, so that the instrument light port to get better protection
- Support U disk, SD card and Micro USB export data protection
- Any interface supports screen capture
AE8500
The AE8500 is a high precision, high-resolution optical spectrum analyzer with a wavelength range of 1250 ~ 1650nm. Users can test optical signals with excellent accuracy, and the 12.1" LCD touchscreen and concise UI design make the AE8500 easy to master. It also provides customizable CWDM/DWDM testing, in-band OSNR, light source, EDFA, fiber probe, auto testing, and more. The AE8500 meets the optical spectrum analysis requirements for several years to come - at superior cost-performance.XFO-520B Optical Power Meter
XFO520 a PON Power Meter (pon test instrument) is specially designed for PON network construction and maintenance which can be connected between OLT and ONT. The voice, data, video signal (1310/1490/1550) online can be measured synchronously and optical power value (1310/1490/1550) can be displayed with this meter. It’s a useful site test tool for the engineers of PON network and maintenance operators. Notice: There are two connector’s type of PON Power Meter: SC/PC and SC/APC, default connector is SC/APC Customers must specify the connector type before ordering this mode
The DS2500Q is a rugged, handheld tool for installation, maintenance and troubleshooting HFC networks. This compact and simple-to-use instrument has an integrated DOCSIS 3.0 cable modem and supports all types of QAM and analog signal measurements such as HUM, modulation depth, MER, BER, constellation display, spectrum, power level and sweep.
Read more AE3100C
Featuring intuitive touchscreen controls, real-time data analysis, and more, the AE3100 is the ideal test instrument for constructing, deploying, maintaining, and authenticating FTTx networks - as well as verifying access networks. Multiple models and configuration options ensure your unique measurement needs are covered. Dual or multiple wavelengths and a choice of dynamic ranges (spanningfrom 28 to 39dB) are also availableXFO-306
Fiber Identifier is a tool necessary for be maintenance of optical fibers used to identify be optical fibers not yet damage. It can detect anywhere in single-mode fiber and multiple mode fiber- During the maintenance, installation, wiring fiber without interruption our business. By transmitting the signal with modulation sound (270Hz, 1KHz, 2KHz) into one end of fiber 1310nm or 1550nm, the identifier can identify the fiber from the route, Fiber identifier can indicate thebusiness direction.FIBER IDENTIFIER TM501
Optical Fiber Identifier is an important tool for optical maintenance, which is used for nondestructive fiber identification project. Meanwhile it also has Visual Fault Locator module with fault location function and power meter function. Using the macro bending technology on line for nondestructive testing, It can measure the signal direction and power and avoid mis-operation resulting in interrupted lines. Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Doesn’t damage optical fiber, without interrupting communications, and direct detection of 2.5mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumperAE2200E- APC
As the demand for bandwidth continues to soar, with higherthan-ever smartphone and streaming video usage, cable operators must face the challenge deploying fiber deeper into the network. And because efficiency, speed, accuracy, and reliability metrics are key for increasing workforce productivity, the natural conclusion is simple: communications service providers (CSP) require a high-performance, efficient, yet affordable test equipment for installing future networks such as FTTx, RFoG and RF PON.
The DS2580C is a rugged, handheld tool for installation, maintenance and troubleshooting HFC networks. This compact and simple-to-use instrument has an integrated DOCSIS 3.0 cable modem and supports all types of QAM and analog signal measurements such as HUM, modulation depth, MER, BER, constellation display, spectrum, power level and sweep. Supports up to 1.22 GHz.
[/vc_row
Read more
Hand-Held intelligent equipment for Optical Fiber Testing and data transmission, with the capacity of Optical Fiber length tests, Db loss, signal quality, etc. It provides quickly and accurately the point of failure of the Fiber Optic link. The best way to build and maintain Fiber Optic networks.
Read more