Product Description
NAP 1×16 FTTH-014 Pre
NAP 1:16 FTTH-014 Pre
Able to hold up to 16 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates
fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.
Producto añadido!
Navegar por Lista de Deseos
El producto ya está en la lista de deseos!
Navegar por Lista de Deseos
Related Products
FTTH- Fast Connector Type Y SC/APC
Fiber optic fast connector designed for FTTH. It is a new generation of fiber connector used in assembly. It can provide open flow and precast type, which optical and mechanical specification meets the standard optical fiber connector. It is designed for high quality and high eddiciency for installation, the structure of crimping position is a unique design.GQ-3650DR
High density and all-in-one multi functional QAM modulator devolped by GOSPELL. It combines RF receiving & demodulation, TS re-multiplexing, scrambling and QAM modulation into 1RU, and provides two kinds of RF demodulation options; either QPSK/8PSK or QAM demodulation can be selected according to operators’ needs. Moreover, the GQ-3650DR supports up to eight channels of input transport streams from ASI interfaces. Therefore, with this product, operators obtain lower cost expenditure, lower energy consumption and minimized space of racks occupied. This all comes from the benefits of GQ-3650DR’s high density and all-in-one design.EDFA 23dB x 32 Outs
- Output ports: 16 or 32 (optional) Optical output power: total output up to 23W
- Low noise figure: <5dB when input is 0dBm
- Perfect network management interface, in line with standard SNMP network management
- Intelligent temperature control system make the power consumption lower
VISUAL FAULT LOCATOR
Pen design, easy to carry and use, easy to check fiber faults with visual light, Portable and rugged, has always, flash, slow flash 3 modes of operation, Master switch in the pen tail pipe
• Easy and Accurate Identification - It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area.
Read more Stripper Cable 500
The FZ136 coaxial cable stripper removes the aluminum jacket and dielectric in a single, fast and precise operation. It is manual or drill-assisted operation. This 500 line coaxial cable stripping tool has a T-shaped handle with a built-in 3/8-inch (9.5mm) drill adapter. The long-lasting cutting blade is heat-treated to make smooth chamfers. Plus you can replace just the blade without spending the entire dielectric removal bit. Spiral-fluted, heat-treated steel bit coring. Strong, durable, all-metal construction.NAP 1:9 FATM-0109R
FATM-0109R fiber access termination box is able to hold up to 9 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.FTTH- Fast Connecor SC/UPC
Optical fast connector takes use of the latest generation of Rapid Ready-Terminal technology. After terminating, both the optical and mechanical performances reach the standard for patchcord and meet the demand for making patchcord on site by mechanical splicing.NAP 1:16 FTTH-016 FT
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.NAP 1:16 FTTH-016 Pre TU
Series fiber access terminal closure is a designed for aerial stand-mounts FTTH drop location where drop cables are spliced to distribution cables. This product can keep internal components. Away from outdoor environmental damage. Its flexible configuration supports 3 cables in, and 3 cable outs. Steel tube type splitter can be built-in. good performance is useful in harsh environment.GYXTW
• Outer Jacket MDPE • Corrugated steel tape covered of Phospated Steel • Loose tube steel ribbon attached with color melt glue • Range of application: for long distance and loca communication • Installation method: in pipeline or underground duct or aerial assembly • Application temperature: -40 ~ +70EDFA 19dB x 32 Outs
- Output ports: 16 or 32 (optional) Optical output power: total output up to 23W
- Low noise figure: <5dB when input is 0dBm
- Perfect network management interface, in line with standard SNMP network management
- Intelligent temperature control system make the power consumption lower
Fiber ADSS Span 100
Loose tube construction, tubes jelly filled, elements (tubes and filler rods) laid up around non-metallic central strength member, polyester yarns used to bind the cable core, water blocking tape wrapped of the cable core, aramid yarn reinforced and PE outer sheath. the prices is for 1 KM, and the purchase is for 5 KM reelFTTH- Fast Connector Type B SC/APC
1.SC APC UPC single mode fast connector terminates the end of an optical fiber and enables quicker connection and disconnection than splicing. 2.The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers.NAP FTTH-2020R
The FTTH-2020R fiber distribution box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTX network building.Outdoor EDFA EA1500
This equipment is an outdoor erbium-doped fiber amplifier independently researched and developed by the company. The product adopts high heat-conducting die-casting aluminum profiles as a whole. The housing has high thermal conductivity and good waterproof performance. It is a harsh environment and is not conducive to the secondary construction of remote areas. Network, the ideal product for long-distance transmission in 1550nm optical signalsZTE ONT F660
GPON Optical Network Terminal designed fot FTTH scenario. It support L3 function to help suscribers construct intelligent home network. It provides subscriber ricj, color full,individualized, convenient and confortable service including voice, video ( IPTV) and high speed intenet accessNAP 1:8 FTTH-012 Pre
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building